Skip to content

Mirrix

16 16" Loom - tall edition
£320.00
1 in stock
The 16" tall edition not only comes with all the usual coils and shedding device , but as its name suggests has greater height - so will suit a weaver looking to weave in a a longer format. Loom width 16" Weaving Width: 13" Weaving length without shedding device: 51" with continuous warping Weaving length with shedding device 47" with continuous warping
Mirrix 16 Mirrix 16" Loom with shedding device
£295.00
5 in stock
16" Loom with shedding device This popular mid-size portable 16" Mirrix loom is simply a larger version of the 12". It has a shedding device and is great for both bead weaving and tapestry, a piece 13" wide x 34" high can be woven. This loom stnads firmly on a table. The loom extenders option work with this loom too. Included: Four coils: 8, 12, 14, 18 dents, shedding device and handle, two wooden…
Mirrix 22 Mirrix 22" Loom with shedding device
£350.00
6 in stock
22" Loom with shedding device The 22" Mirrix loom is large enough to weave a substantial, although not enormous, tapestry. It has great proportions, but is still lightweight and easy to move around. It’s also great for weaving beads especially if you are leaning toward beaded tapestries, purses, phone cases - it also works for bracelets and necklaces, including weaving a split loom necklace. If yo…
Mirrix 28 Mirrix 28" Loom with shedding device
£415.00
28" Loom with shedding device On the 28 inch wide Mirrix loom you can weave a piece 25 inches wide and 59 inches long. It comes with double beams on the top and bottom (like the 32" and 38" looms) for added strength. Included: Four coils: 8, 12, 14, 18 dents, shedding device and handle, two wooden clips, warping bar, flat wrench, Allen wrench, coil bar and written instructions. Dimensions: Weight:…
Mirrix 32 Mirrix 32" Loom with shedding device
£450.00
32" Loom with shedding device The 32" loom will suit serious weavers wishing to create a tapestry or a bead weaving of a size normally only possible on large floor looms. With a double top and bottom beam it is a little stronger than some of the smaller looms and accommodates the kind of high tension many tapestry weavers demand. Warp it up from edge to edge and it will maintain edge tension, allo…
Mirrix 38 Mirrix 38" Loom with shedding device
£550.00
38" Loom with shedding device The 38" loom is the largest Mirrix loom available. It can make a piece 35" x 61" and is easily transformed into a floor loom by adding a stand and treadle. Having the benefit of double aluminium bottom and top beams this loom provides better tension than many wooden floor looms. It can easily be moved, from room to room or taken to a workshop. The shedding device is e…
Mirrix 8 Mirrix 8" Loom with shedding device
£230.00
4 in stock
8" Loom with shedding device The 8" loom has a lot of flexibility and works as well for weaving bracelets, necklaces, purses, straps, pouches, phone cases and small bead or fibre tapestries. It is a great loom for bead weaving or tapestry, for beginners or an expert. It sits sturdily on a table, but can also be held securely in your lap or flat on a table. This loom comes with a shedding device fo…
Allen wrench Allen wrench
£2.00
5 in stock
Choose the colour according to the colour of the standoffs on your Mirrix shedding device to get the correct Allen wrench. Newer looms will have silver coloured standoffs The standoffs are the pieces that hold the 2 thin metal bars on the shedding device.
bottom spring kit (without coils) bottom spring kit (without coils)
£16.00 - £35.00
10 in stock
Mirrix Bottom Spring Kits are Perfect for: weaving wide bead pieces, weaving wide tapestry pieces and small format tapestry (more than 18DPI) The bottom spring kit allows you to attach a warp coil to the bottom of your loom. It is a plastic tray (for holding the spring/warp coil at the bottom of the loom - like the one at the top) with two attached brass acorn nuts for holding the spring. The warp…
Extra warping bar kit Extra warping bar kit
£16.00 - £42.50
6 in stock
This kit allows you to put on a shorter warp. In doing so you will reduce warp waste. Because it also eliminates having a layer of warp on both the front and back of the loom, it allows you to better position your hand for weaving wider pieces with the traditional method of bead weaving. You don’t have to warp your Mirrix this way for weaving beads, but it’s a nice alternative and adds yet another…
Loom extenders Loom extenders
£35.00 - £45.00
7 in stock
The Mirrix loom extenders are ideal for people who want to weave longer, thin pieces without having to purchase one of the large looms. Included: 2 lengths of threaded rod, a coupling device to attach it to the threaded rod side bars of the loom, feet extenders for 12"-16" and 22" only - to give your loom its original stability. There are three sizes of loom extenders for the following size of loo…

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.