Mirrix

The Easy Warp 12" Loom is the perfect loom for beginners interested in tapestry or other types of weft-faced weaving. It is a 12" Loom, but one that comes with just the basics: a frame and a 14 dent coil (and no coil tray). Because it is the same size as the 12" Loom, you can add on accessories like a shedding device or Extra Warping Bar Kit as you need them. The chief difference between the Easy…

This popular mid-size portable 16" loom is simply a larger version of the 12". It has a shedding device and is great for both bead weaving and tapestry, a piece 13" wide x 34" high can be woven. This loom stnads firmly on a table. The loom extenders option work with this loom too. Included: Four coils: 8, 12, 14, 18 dents, shedding device and handle, two wooden clips, warping bar, flat wrench, All…

The 22" loom is large enough to weave a substantial, although not enormous, tapestry. It has great proportions, but is still lightweight and easy to move around. It’s also great for weaving beads especially if you are leaning toward beaded tapestries, purses, phone cases - it also works for bracelets and necklaces, including weaving a split loom necklace. If you are planning to own two looms, this…

On the 28 inch wide loom you can weave a piece 25 inches wide and 59 inches long. It comes with double beams on the top and bottom (like the 32" and 38" looms) for added strength. Included: Four coils: 8, 12, 14, 18 dents, shedding device and handle, two wooden clips, warping bar, flat wrench, Allen wrench, coil bar and written instructions. Dimensions: Weight: 5.5kgs Width: 28" Height: 18.5" - 36…

The 32" loom will suit serious weavers wishing to create a tapestry or a bead weaving of a size normally only possible on large floor looms. With a double top and bottom beam it is a little stronger than some of the smaller looms and accommodates the kind of high tension many tapestry weavers demand. Warp it up from edge to edge and it will maintain edge tension, allowing you to create a piece as…

The 38" loom is the largest Mirrix loom available. It can make a piece 35" x 61" and is easily transformed into a floor loom by adding a stand and treadle. Having the benefit of double aluminium bottom and top beams this loom provides better tension than many wooden floor looms. It can easily be moved, from room to room or taken to a workshop. The shedding device is easy and efficient to operate.…

The 8" loom has a lot of flexibility and works as well for weaving bracelets, necklaces, purses, straps, pouches, phone cases and small bead or fibre tapestries. It is a great loom for bead weaving or tapestry, for beginners or an expert. It sits sturdily on a table, but can also be held securely in your lap or flat on a table. This loom comes with a shedding device for those who want to weave sma…

Choose the colour according to the colour of the standoffs on your shedding device to get the correct Allen wrench. Newer looms will have silver coloured standoffs The standoffs are the pieces that hold the 2 thin metal bars on the shedding device.

Bottom Spring Kits are Perfect for: weaving wide bead pieces, weaving wide tapestry pieces and small format tapestry (more than 18DPI) The bottom spring kit allows you to attach a warp coil to the bottom of your loom. It is a plastic tray (for holding the spring/warp coil at the bottom of the loom - like the one at the top) with two attached brass acorn nuts for holding the spring. The warp coil o…

This kit allows you to put on a shorter warp. In doing so you will reduce warp waste. Because it also eliminates having a layer of warp on both the front and back of the loom, it allows you to better position your hand for weaving wider pieces with the traditional method of bead weaving. You don’t have to warp your Mirrix this way for weaving beads, but it’s a nice alternative and adds yet another…

The Mirrix loom extenders are ideal for people who want to weave longer, thin pieces without having to purchase one of the large looms. Included: 2 lengths of threaded rod, a coupling device to attach it to the threaded rod side bars of the loom, feet extenders for 12"-16" and 22" only - to give your loom its original stability. There are three sizes of loom extenders for the following size of loo…

This five and a half foot tripod stand holds any of the Mirrix looms at six different heights. Your loom snaps on and off in an instant. A convenient tray holds tools, yarn and beads. You will be able to find the perfect loom height for you whether you want to sit or stand. This is a great alternative to using up table space! Stand includes: tripod, bar with attached tray, two c-clamps Height sett…

The new power treadle (launched 16/7/2014) is the first (that Mirrix know of) electric treadle for a portable tapestry loom. You can easily change the shed by pressing down on a pedal that will electronically change the shed without having to use your hands, which makes for fast and easyr tapestry weaving! please phone or email to make an order

These one-eye heddles are specially made for Mirrix in Sweden from the same texsolv used to make non-metal heddles for floor looms. They are easy to use, strong, long-lasting, reusable, and are good at almost any sett on the loom because they are thin. These are the only pre-made heddles you can buy that work on the Mirrix Loom if you choose not to make your own. Note: For bead weaving past 18 den…

To be used in our no warp ends kit. Buy these as a stronger alternative to paper clips (that you have in your kit if it was purchased before 9/27/2012) or as extras. These zinc plated S-hooks are high-quality and come in packs of 20, which can make a piece 19 warps (18 beads) across.

Rod length 14.5" Use this rod to get a 12" weaving length on your Saffron loom

A little loom designed primarily for tapestry weaving that is simple to put together and warp! It has a tensioning device, adjustable height and can be taken apart for travel! Loom details Sett: 8epi (if double warped 16epi, and warped every other dent 4epi) Weeaving width: 5" Weaving Length: 8" Composition; Cherry wood top & bottom beams, steel threaded rod, aluminium combs Resource speciffically…

These combs essentially turn a Mirrix Loom into a simple frame loom (read: very simple to use) but with the amazing Mirrix tensioning system and the ability to use the Mirrix shedding device. The combs are not meant to replace our current warping system, which offers the advantage of putting on a warp that is longer than the loom itself as well as a variety of warp setts, but to provide an additio…

Saffron loom not included, but shown in photos to demonstrate the stand in action!

For Bead Weaving: Place the beads you plan on weaving on a needle and measure an inch. Then, count how many beads are in that inch. The number of beads minus one is the warp coil that will be used. For example, if you are using Delicas you would find 19 Delicas are in one inch, so you would use the 18 dent coil. There is some leeway in this, and depending on the beads you are using, it might not w…

Important: This set of clips is for use with shedding devices which have the older style copper-colour standoffs. Individually hand milled in the United States of beautiful hardwoods, these clips hold the warping bar when warping your loom and then hold the shedding device if you're using it. These clips may be used as an extra set or to replace your clips if you're using the older, black plastic…